Ultrapure water system, P series
This powerful and intuitive laboratory water purification system
produces Type I ultrapure water from RO, distilled or deionised water.
The product water quality meets or exceeds CLSI and CAP Type I water
standards.
- Simple and intuitive to dispense water via the dispenser or central console
- Central console is an 8 inch waterproof touch screen, providing user full control and access of system performance
- One water system can drive several dispensing units ('1 + N mode')
- Dispensing flow rate is up to 2 L/min and volumetric dispensing is available
- RFID-tagged consumables for easier tracking of lifetime and performance
- Wireless communication option to control multiple dispensers and the central console (optional)
- Real time TOC and resistivity/conductivity monitoring
- Users can see essential information (water quality, system status, warnings) on the dispenser unit and the central console at any time (data stored up to 2 years; downloadable)
SPECIFICATIONS
| Model | P |
| Feed water | EDI water, RO water, distilled water, deionised water |
| Flow rate | Max. 2 l/min |
| TOC content | <5 ppb |
| Resistivity at +25 °C | 18,2 MΩ·cm (Type I) |
| Particles | No particles >0,2 μm (with a 0,2 μm final filter or Bio filter) |
| Endotoxin | <0,001 EU/ml (with Bio filter) |
| Microorganisms | <0,1 cfu/ml (with a 0,2 μm final filter or Bio filter) |
| RNases | <0,5 pg/ml (with Bio filter) |
| DNases | <10 pg/ml (with Bio filter) |
| W×D×H (mm) | 300×480×510 |
Dimension:
Code:
P series